●【Radar Motion Sensor】The light will turn on by itself when motion detected and turn off if no further motions around. The radar sensor is so sensitive that it may activate the light sometimes even with doors/walls/windows closed.It is suggested to use the ceiling light in space such as hallways,stairwells,garage where spaces are big enough.
●【Energy Efficient 】 Uses only 15W of energy,equals to100W incandescent bulb.
●【Daylight threshold 】With insufficient daylight,when motion detected light on; with sufficient daylight,even when motion detected light remains off. Disabling the function to let the light turn on whenever motion detected.
●【Detection Range 】4 levels of motion sensor sensitivity settings: 10%,50%,75%,100%. Maximum covering detection radius 23ft
●【Lighting Duration 】4 options of duration setting: 5 seconds,90 seconds,5 minutes,15 minutes.Light will turn off automatically after the given time if no motions around.
LED Ceiling Light Features:
1. Die-casting aluminum lamp body, excellent heat dissipation.
2. IP65 waterproof, dustproof for indoor and outdoor lighting
3. Milky white PC cover, high impact resistance
4. Stainless steel hexagon socket head cap screws
5. Can be installed with a motion sensor, detector, PIR sensor
6. Available for emergency function
7. Black / white / grey aluminum housing color available
8. Energy saving, not emitting UV and IR, no RF interference
With Microwave/Motion sensor 0%-100% ,easy adjustable and install
Microwave Motion Sensor are available to add inside the square led ceiling light, The Microwave Motion Sensor is an innovative motion sensor, switch on the light when detection of movement, and switch off after a hold time when there is no motion detected. As built-in daylight sensor can read brightness value, the sensor does not switch on the light if with sufficient natural light.
Detection area: from 2m to 6m
Hold time: 5s, 30s, 90s, 3min, 20min, 30min
Daylight sensor: 2LUX, 10LUX, 25LUX, 50LUX, Disable
Same diameter 300mm for 20W 30W 40W, Black,White, Grey colors for choose
High Power SMD LED
Driver Input Voltage
85~265v AC 50 / 60Hz
Colour Temperature (CCT)
Rated Life (L70)
-10C ~ 40C
-20C ~ 80C
5% ~ 95%RH
Poly Carbonate (PC)
Powder Coat Black
Wall Mounted, Surface mounted
CE ROHS SAA IK10 Approved