What is the safest and most economical way to transport led garden lights?

- Mar 18, 2019-

What is the safest and most economical way to transport led garden lights?

Whether it is landscape lights, street lights, led garden lights, or monitor bars, the smallest size will generally reach a height of about 3 meters. Here we will follow the 3 meter led garden light as an example to talk about the transportation of led garden lights.

If there are not many, there are several sets of led garden lights, and the road is far away, we think it is more cost-effective to go with the logistics company; if there is a product of the same batch just sent to your city, then just right In the past, it is safer to ask the individual driver to follow the whole vehicle. If the number is more, the 3 meter led garden light can pull more than 100 sets without any problem, then the whole vehicle will be shipped.

When the manufacturer makes a custom, you need to tell everyone that the whole vehicle shipment is safer than the logistics company. The delivery of the logistics company may cause bumps and bumps, and the whole vehicle is shipped by a personal driver to our factory, and the goods are loaded personally, and will not be unloaded and loaded with other goods in the middle. This will avoid unloading. The trouble of rubbing goods and other products. The logistics company will not, as long as it can be filled, they will be forced to go up, will not consider whether the product is scratched or bumped.

In summary, I hope that everyone will have a certain understanding of what is the safest and most cost-effective way to use led garden lights. If the customer needs it, we can find the transportation vehicle for the customer. The freight rates in different regions are also different. The specific calculations are based on the driver's quotation. We cooperate with fixed logistics companies all the year round and will definitely try to find the safest car with the most cost-effective transportation.

Whether it is a street light pole or a led garden light pole or a landscape light pole, as long as the iron rod is used outside for a long time, it is necessary to face the possibility of rust. Even in the context of today's rust-proof process, there are times when it can't resist the erosion of harsh environments. The final result of the corroded light pole is that the life is greatly reduced, and the aesthetics is seriously affected, and there are safety hazards. So in order to ensure the longer life of all kinds of poles, what kind of method should we take to surface the high pole lamp poles to achieve better oxidation resistance? In fact, we need to do anti-rust measures:

The first is to carry out galvanizing treatment;

Zinc plating is also divided into hot galvanizing and cold galvanizing. Let me talk about cold plating. Cold plating is a simple treatment by electroplating. The amount of zinc is small, just like a film is attached. Hot-dip galvanizing requires pickling and 500-degree high-temperature galvanizing, followed by a water wash-phosphating-passivation process. It is also judged from the degree of the process that hot-dip galvanizing is better, the adhesion of the zinc layer is stronger, and the age of rust prevention is more guaranteed.

The second is to carry out electrostatic spray molding;

Polyester plastic powder, plastic powder thickness greater than 85 microns, to ensure that the plastic layer is flat, high adhesion and UV protection. After such two treatments, it is usually ensured that the high pole lamp pole will not rust for ten years, and the anticorrosion life can reach 30 years or more. However, if the cold galvanizing used is not good, the areas with large rainfall and frequent years will not start to rust. Therefore, the anti-oxidation method of the high pole lamp pole is mainly hot-dip galvanizing and electrostatic spraying.