How to realize long-term illumination of solar motion sensor lights
As a landscape lighting source, the solar motion sensor lamp has many designs on the style. In order to achieve good landscape lighting, in addition to the conversion rate of the light source system, the installation of the garden lamp is also very important for achieving good lighting.
For the installation of solar motion sensor lights, the installation methods of different styles of street lamps are also different. For example, small garden lights used in lawn lighting can be inserted into the soil or prefabricated holes during installation, and then good lighting can be achieved when the power is turned on.
In order to ensure the stability of the street lamp during the installation process, some of the garden lights with the light pole need to be used as a base for the street lamp to match the light pole before the installation and construction, and then the installation of the various components of the garden light can be performed. Achieve good landscape lighting.
In the installation process of solar motion sensor lights, the installation methods of different types of garden lights are also different. Only by selecting appropriate installation methods according to actual conditions can we achieve long-term stable high-quality lighting.
As an outdoor lighting source, solar motion sensor lights are usually below 6 meters in height. Because of their versatility and aesthetics, the sun's motion sensor lights are mostly used for landscape lighting. In terms of lighting standards, the solar motion sensor light can reach more than 2300 lm, the color temperature is 2700K, the lamp height is 3.5m, and the color rendering index can basically reach Ra=80 with good lighting effect.
In order to achieve good landscape lighting and ensure the service life, the main parameters of the solar motion sensor lamp are mainly composed of: all-steel structure, integral hot-dip galvanized/spray-treated lamp post; 15-80WP crystalline silicon panel according to load; Maintenance of lead acid or colloidal batteries; solar energy-saving lighting dedicated light control + time control controller. In addition, the protection level of the solar motion sensor lamp during the installation process should reach the industry standard of IP65, and the wind resistance design should be ≥150Km/h.
When installing street lamps, if a garden lamp with a mask is used, the street lamp spacing should be controlled at about 16 meters. If the garden lamp with diffuse reflection without a mask is used, the installation spacing should be controlled at 18 to 20 meters. As the main light source of road or landscape lighting, the solar motion sensor lamp system should be controlled by two-way interval jumper mode, so that the solar motion sensor lamp can save energy and reduce the cost of the downlight system during the application process.