12V Voltage 8W Rated Power Solar garden light with 2.4-6meter pole
The solar garden light uses solar energy as energy source and solar radiation energy as energy. During the day, the solar battery panel is used to charge the battery. At night, the battery is used to power the solar garden light garden light source. The layout of the lamp can be adjusted arbitrarily, safe, energy-saving, pollution-free, charging and The on/off process adopts intelligent control, light control automatic switch, stable and reliable work, saving electricity and maintenance.
The garden lamp generally has a small power, the conventional single light source power is 5W-50W, the double light source garden lamp base is 10-20W, and the garden light height is 2.4-6 meters.
The specific power and height can be customized according to the needs of customers.
Solar Garden Lights Advantages:
1. Long life
The semiconductor chip emits light, has no filament, is not easily broken, and has a service life of up to 50,000 hours.
2. Light health
The light does not contain ultraviolet light and infrared rays, and does not generate radiation (normal light lines contain ultraviolet rays and infrared rays)
3. Green environmental protection
Contains no harmful elements, which is good for recycling and utilization, and does not cause electromagnetic interference
4. Protect eyesight
DC drive, no strobe
5. High light efficiency and low heat generation
90% of electrical energy is converted into visible light
6. High safety factor
The required voltage and current are small, the heat is small, no safety hazard is generated, and it can be used in dangerous places such as mines.
7. Great market potential
Low-voltage, DC power supply, battery, solar power supply, solar garden lights can be used in remote mountain areas and outdoor lighting, such as lack of electricity, less electricity. The unique LED lampshade enables the solar luminaire to achieve the perfect combination of functionality and decoration.
Garden lamp installation method:
Before installing the garden lamp, it is necessary to use the M16 or M20 (common specification) screw to weld the base cage according to the standard flange size provided by the manufacturer, and then excavate the pothole of the appropriate size at the installation site. The foundation cage is placed therein, and after horizontal correction, cement concrete is used to water the concrete cage, and after 3-7 days, the cement concrete is fully solidified, and the garden lamp can be installed. (Note: the pre-embedded pipeline needs to be taken out when the garden light is poured.)
Open the lamp housing, install the light source and supporting electrical appliances (refer to the electrical manual for electrical wiring), lead the lead wire out of the threading hole to the bottom of the pole, then link the lamp cap to the lamp post, pay attention to tighten the fastening screw, then flange the garden lamp Align with the basic embedded screw and stand vertically. Then use a nut or pad to level the flat to tighten the mounting nut.
It should be noted that the installation wiring needs to be grounded. Generally, the garden light will be reserved with a grounding terminal for grounding to prevent potential safety hazards.